7
Access the Main pane.
8
In the A Media Type list, select the type of paper that is loaded. In this case, click Canon Glossy Photo Pa-
per 170gsm.
9
Select the print target in the E Print Target list.
Important
•
When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit
touches printing surfaces that are not dry yet, it may damage the paper or the edge of the document that is
cut, depending on frequency of use. In this kind of situation, change the ink drying time in Between Pages in
the Paper Detailed Settings dialog box.
10
Access the Page Setup pane.
11
Select and click a roll paper in the A Paper Source list.
Select the paper width of the roll loaded in the printer for B Roll Width. In this case, 10 in. (254.0mm) is selec-
ted.
Borderless Printing at Actual Size (Mac OS)
iPF670
User's Guide
Enhanced Printing Options Printing at full size
84
To Next Page
Loading...
