Canon iPF9000S - Error Code Index

Chapter 2 Indexes by Case
2-1
1. Error Code Index
Panel display
Code
(last 4
digits)
Large LCD
Small
LCD 1
Small
LCD 2
Explanation/Detection sequence
Remedial Action
(★: Reference fault
isolation procedure
or tool)
- Sheet printing
is selected, but
a roll is loaded.
Paper mismatch (cut sheet)
Print data having a cut sheet print
specification has been received with
rewinder use being selected.
Printing on cut
sheet is not
functional with a
rewinder in use.
- Media Type not
compatible with
cassette.
Check Media Type.
Stop: Stop Printing
Media
Check
Please
Cancel
Cas
Cannot
Feed
Please
Check
Paper mismatch (cut sheet)
Cassette pickup has been specified for
paper that does not support cassette pickup.
Check the
cassette pick-up
setting/paper
type.
- Regular printing
is selected, but
a roll is loaded.
Press OK,
remove the roll,
and load sheets.
Paper mismatch (cut sheet)
Print data having a manual feed print
specification has been received at the
completion of roll paper pickup.
Check the
cassette pick-up
setting/paper
type.
- Papr Type
Mismatch
PaprTyp
Mismatch
Paper mismatch (type)
(1) Mismatch following the selection of any
of the following menu choices:
- [Warning Indication] has been selected for
[Paper Mismatch Detection].
- [ON] has been selected for [Paper Error
Skip].
(2) On forced printing following a mismatch
resulting from the selection of the following
menu option:
- [Pause] has been selected for [Paper
Mismatch Detection].
This is a warning
and allows
continued
printing.
- Paper
Mismatch
Paper mismatch (both type and size)
(1) Mismatch following the selection of any
of the following menu choices:
- [Warning Indication] has been selected for
[Paper Mismatch Detection].
- [ON] has been selected for [Paper Error
Skip].
(2) On forced printing following a mismatch
resulting from the selection of the following
menu option:
- [Pause] has been selected for [Paper
Mismatch Detection].
This is a warning
and allows
continued
printing.
- Papr Size Mismatch PaprSiz
Mismatch
Paper mismatch (size)
(1) Mismatch following the selection of any
of the following menu choices:
- [Warning Indication] has been selected for
[Paper Mismatch Detection].
- [ON] has been selected for [Paper Error
Skip].
(2) On forced printing following a mismatch
resulting from the selection of the following
menu option:
- [Pause] has been selected for [Paper
Mismatch Detection].
This is a warning
and allows
continued
printing.
- Cannot print
as specified.
Lift the release
lever and replace
paper with A4/LTR
(vertical) or larger
Paper mismatch (size)
When performing internal printing, paper
loaded is smaller than the size specified for
each print purpose.
[XXX]: appropriate paper size
Replace the
paper with
appropriate one.
- Sheet printing
is selected.
Press Load/Eject
and load sheets.
Paper mismatch (cut sheet)
No cassette paper has been loaded when
data having a cut sheet specification is
received. (Paper type /size not determined)
Load cut sheet.