Canon iPF9000S - Index of Symptoms and Imaging Failures

Chapter 2 Indexes by Case
2-57
2. Index of Symptoms and Imaging Failures
Category
Imaging Failures ··········································································· A
Operational Failures ····································································· B
Functional Failures ·········································································C
Cutting Failures···············································································D
Unusual Noises··············································································· E
Application-Dependent ··································································· F
A. Imaging Failures
Category Item Subitem Remedial Action (tool)
A Soiled print side Chapter 4: Imaging Failures ①
A Ink dropping Chapter 4: Imaging Failures ①
A Soiled reverse side Chapter 4: Imaging Failures ①
A Black dots (spur marks） Chapter 4: Imaging Failures ①
A White dots (spur marks） Chapter 4: Imaging Failures ①
A Roller marks Chapter 4: Imaging Failures ①/②
A Peeled ink Chapter 4: Imaging Failures ①
A Line, streaks and bands Chapter 4: Imaging Failures ②
A Blurred or undersharp images Chapter 4: Imaging Failures ③
A Blurred or blotted images Chapter 4: Imaging Failures ③
A Shaken or ghost images Chapter 4: Imaging Failures ③/④
A Thick or double lines or characters Chapter 4: Imaging Failures ④/③
A Defective toning Chapter 4: Imaging Failures ⑤
A Color misregistration Chapter 4: Imaging Failures ⑤
A Missing lines and images Chapter 4: Imaging Failures ⑥
A Printing different from settings Chapter 4: Imaging Failures ⑦
A No printing Chapter 4: Imaging Failures ⑧
A Wrong length Prioritize length (specify a magnification).
Specify a magnification for the present output matter (enter a
menu description).
A Wrinkled paper Remove the cause of skewing.
Clean the cassette pick-up roller.
A Iridescent metallic luster visible Bronze symptom (reflected illuminating light colored by
diffusion on the print surface)
A Ink won’t dry on tracing paper or the
like
Chapter 4: Imaging Failures ③
Change the drying time setting (lengthen).
A Scratching (ink peeling) Chapter 4: Imaging Failures ③
Change the drying time setting (lengthen).
A Poor halftoning (RIP environment) Avoid printing in black alone (but print in multiple colors).
A Paper undertone noticeable Change paper.
A Uneven POP board colors noticeable Properties of the paper.
Change the print mode to an upper mode.