Canon iPF9000S - Page 15

Chapter 2 Indexes by Case
2-3
Panel display
Code
(last 4
digits)
Large LCD
Small
LCD 1
Small
LCD 2
Explanation/Detection sequence
Remedial Action
(★: Reference fault
isolation procedure
or tool)
Ink Level: Check Ink Lvl:
Chk XX
1000
to
100C
Not much ink is
left. Prepare to
replace the ink.
Ink tank near-empty (continued use allowed)
The remaining volume of ink is diminishing
(below the pin check level).
(XX: Target color display)
Last 2 digits of error code:
00:Bk, 01:Y, 02:M, 03:C, 04:PM, 05:PC,
06:MBk1, 07:MBk2, 08:GY, 09:PGY, 0A:R,
0B:V, 0C:GR
①Replace the
tank (continued
usage
allowed).
②If the problem
persists after
the tank has
been replaced,
the remaining
ink detection
system is at
fault. (Replace
the supply unit
or check
catching wire or
connection
status of
harness.)
Problem with
Printhead L/R
Chk printing results
CheckPri
ntout:LR
1010
Check printed
document.
Check
Printout
Head non-ejection warning (Check printout/
possible to continue printing)
See 280C for detection criteria.
1012 Problem with
Printhead R
Chk printing results
CheckPri
ntout:R
Head R non-ejection warning (double-head
model)
(Check printout/ possible to continue printing)
See 280C for detection criteria.
1013 Problem with
Printhead L
Chk printing results
CheckPri
ntout:L
Head L non-ejection warning (double-head
model)
(Check printout/ possible to continue printing)
See 280C for detection criteria.
①Check image
quality. (Unless
there are
problems with
the image
quality, there is
no need to
replace the
head.)
②Replace the
head.
★If the problem
persists, go to
2F2F (P3-6).