Chapter 2 Indexes by Case
2-13
Panel display
Code
(last 4
digits)
Large LCD
Small
LCD 1
Small
LCD 2
Explanation/Detection sequence
Remedial Action
(★: Reference fault
isolation procedure
or tool)
Paper size not
detected.
Lift the release
lever and reload
the paper.
Paper
Please
Reload
Size
Undetect
ed
Press
↑ Key
Paper size is
undetected.
Reload paper.
Paper size not
detected.
Press Load/Eject
and reload the
paper.
Paper size not
detected. Lift the
release lever.
Could not detect
paper size. Push
release lever back,
then pull out the
cut sheet.
2017
Could not detect
paper size.
Press OK, then
Insert roll paper
straight into feed
slot..
Papr Size
Undetecte
d
Press
Online
Key
and
Reload
Paper (right) side detection error
①Multisensor error on light quantity
adjustment
②The read reference paper edge is 5 mm or
more apart from its theoretical position.
③Cannot locate the edge of reference
paper.
Go to ★2010
(P3-12).
To Next Page
Loading...
