Canon iPF9000S - Page 36

Troubleshooting Guide
2-24
■Initial firmware
Less than 30 30 or over
more than 0, less than 100
--- Check printout
more than 100, less than 200
--- Check head
200 or over Check head Check head
■
R
unn
i
ng c
h
ange
fi
rmware
more than 0, less than 320
320 or over
less than 30 30 or over
more than 0, less than 100
--- Check printout
more than 100, less than 320
--- Check head
320 or over Replace head Replace head
■
iPF650/750 series, iPF6300/6350/8300 and later model
more than 0, less than 320
320 or over
less than 30 30 or over
more than 0, less than 100
--- Check printout
more than 100, less than 320
--- Check head
320 or over Replace head Replace head
No. of nozzles impossible to back up
No. of nozzles impossible to back up
No. of non-
ejecting nozzles
1 color (per chip)
The specifications have been changed from the versions shown below.
iPF500/600/5000/700: Ver.1.33 iPF510/610/710/8000/9000: Ver.1.36
iPF8100/9100/8000S/9000S: Ver.1.37 iPF810/820/6000S: Ver.1.03
iPF605/6200: Ver.1.02 iPF5100/6100: Ver.1.38
iPF720:Ver.1.10
No. of non-ejecting nozzles
1 color (per chip)
You can choose A: (default setting) or B: (if you want to use automatic stop
）
from Service mode.
A: (default setting
---
No. of non-
ejecting nozzles
1 color (per chip
）
No. of non-
ejecting nozzles
1 color (per chip)
No. of nozzles impossible to back up
You can choose A: (default setting) or B: (if you want to use automatic stop) from User
m
---
B: (If you want to
use automatic
stop)
Head replacement
A (Default setting
)
B (if you want to
use automatic
stop)
No. of non-
ejecting nozzles
1 color (per chip)
Error code Applicable printhead
1010 LR or single-head model
1012 R head
1013 L head
280C LR or single-head model
280D R
280E L
2827 LR or single-head model
2828 R
2829 L
Check printout
Check head
Replace head