Canon iPF9000S - Page 46

Troubleshooting Guide
2-34
Panel display
Code
(last 4
digits)
Large LCD
Small LCD
1
Small
LCD 2
Explanation/Detection sequence
Remedial Action
(★: Reference fault
isolation procedure
or tool)
Wrong paper size.
Check paper size
setting on computer.
Online: Print
Stop: Stop Printing
PaprSiz
Mismatch
Prnt:Pres
sOnline
Loaded
Papr Diff
From
Spfd
Size
Wrong paper size.
Check paper size
setting in driver.
Online: Print
Stop: Stop Printing
2E08
PaprWidth Mismatch
Driver:
Chk Papr
Size
Setting
Loaded
Papr Diff
From
Spfd
Size
Paper mismatch (size) (roll paper)
The width of data and that of the actually
loaded paper do not match.
Check the paper
that is actually
loaded on the
printer and the
paper size setting
of the driver.
Go to ★2010
(P3-12).
2E09 Insufficient paper
for job
Roll
Paper
Please
Replace
Paper
Level
Low
Replace
Paper
Short on roll paper
All of the following conditions have been met
at the start of printing:
・[ON] has been selected for [Remaining Roll
Paper Detection].
・Among the paper size settings coded in the
print data, the paper length exceeds the
remaining length of roll paper.
Replace the roll
paper.
Roll printing is
selected, but sheets
are loaded.
Press Load/Eject
and
remove the sheets.
Roll printing is
selected, but manual
paper is loaded.
Roll printing is
selected, but sheets
are loaded.
Press OK,
remove the sheets,
and load a roll.
Roll printing is
selected, but sheets
are loaded.
OK:Eject Sheets
Stop:Stop Printing
2E0A
Roll printing is
selected, but sheets
are loaded.
Sheets
Loaded
Press ↓
To Eject
Roll
Selected
Load
Roll
Paper mismatch (roll paper)
Print data having a roll paper print
specification has been received at the
completion of manual feed paper pickup.
Check the paper
that is actually
loaded on the
paper and the
paper feed
setting of the
driver.