● To connect to an IEEE 802.1X network, see Conguring IEEE 802.1X
Authentication(P. 248) .
Select wired or wireless LAN.
Selecting Wired LAN or Wireless LAN(P. 134)
Connect to a wired or wireless LAN.
● Proceed to the section that corresponds to the setting you selected in step 2.
Connecting to a Wired LAN(P. 135)
Connecting to a Wireless LAN(P. 136)
Set the IP address as necessary.
● At the time of purchase, the machine is set to automatically acquire an IP address.
Change this setting if you want to use a specic IP address.
Setting IP Addresses(P. 153)
Network
133
To Next Page
