Saving/Loading Registered Data
0W20-053
Menu options data that has been registered in the machine can be saved in your computer (export). Data that is saved
on your computer can also be registered in the machine (import). Data exported from this machine can be imported to
another machine of the same model. So you can easily copy a variety of settings data to multiple machines. To use
these features, it is required that you have logged on in System Manager Mode.
Saving Registered Data(P. 282)
Loading Registered Data(P. 284)
Do not turn OFF the machine until the export/import process is complete
● It may take a few minutes to complete the process. If the machine is turned OFF during the process, it may
result in damage to data or the machine.
Do not operate the machine during the export/import process
● Before exporting/importing, check that no operation such as printing documents is currently processing.
Settings that cannot be imported/exported
● See Setting Menu List(P. 287) .
Import/export using the operation panel
● Using USB memory, settings can be imported and exported from the Settings menu in the operation panel.
Using a USB Memory Device to Save/Load Registered Data(P. 417)
Using Remote UI
281
To Next Page
Loading...
