Canon LBP252dw - Adjusting Print Position

Adjusting Print Position
0W20-08F
If a document is printed off-center or out of the printable range, adjust the print position. You can adjust the print
position for each paper source. You can adjust the print position in the range -5.0 to +5.0 mm in vertical direction, and
in the range -3.0 to +3.0 mm in horizontal direction, both in increments of 0.1 mm.
Checking the Direction and Distance to Adjust
When you adjust the print position, specify the direction using "+" and "-" and the distance using "mm." For
<Adjust Vertically (Front Side)>/<Adjust Vertically (Back Side)>, specify a value with a "+" sign to shift the print
position in the up-to-down direction. For <Adjust Horizontally (Front Side)>/<Adjust Horizontally (Back Side)>,
specify a value with a "+" sign to shift the print position in the left-to-right direction. To shift in the reverse
direction, specify a value with a "-" sign.
<Adjust Vertically (Front Side)>/<Adjust Vertically
(Back Side)>
<Adjust Horizontally (Front Side)>/<Adjust
Horizontally (Back Side)>
1
Press .
2
Use / to select <Adjustment/Maintenance>, and press .
3
Select <Adjust Print Position>, and press .
4
Select the paper source, and press .
5
Select the combination of adjustment direction and printing side, and press .
6
Set an adjustment value.
Maintenance
407