Canon LBP252dw - Page 177

*
When you select the [Device Type], select [Canon Network Printing Device with P9100] under [Standard].
5
Click [Finish].
6
Click [Close].
Changing the port type or number
If the printing protocol (LPD or RAW) has been changed on the machine side ( Conguring Printing
Protocols and WSD Functions(P. 165) ) or the port number has been changed (
Changing Port
Numbers(P. 226) ), the corresponding settings on the computer must also be congured. This operation is
not needed for WSD ports.
MFNP port
1
Click [Congure Port].
2
Under [Protocol Type], select [RAW] or [LPR], and change the [Port Number].
3
Click [OK].
Standard TCP/IP port
1
Click [Congure Port].
2
Under [Protocol], select [Raw] or [LPR].
● If you selected [Raw], change the [Port Number].
● If you selected [LPR], enter "lp" in [Queue Name].
Network
171