Density
Adjust the toner density. Adjusting Print Density(P. 405)
Density
17 Levels
Fine Adjust
High
17 Levels
Medium
17 Levels
Low
17 Levels
● The settings specied for <Density> are disabled when <Toner Save> is enabled.
Toner Save
You can save toner consumption. Select <On> when you want to check the layout or other appearance
characteristics before proceeding to nal printing of a large job.
Off
On
<Printer Settings>
<Print Quality>
<Toner Save>
Select <Off> or
<On>
Resolution
Specify the resolution to be used for print data processing.
1200 dpi
600 dpi
<Printer Settings>
<Print Quality>
<Resolution>
Select <1200 dpi>
or <600 dpi>
Barcode Adjustment Mode
If bar codes printed with this machine cannot be read, set this item. The improvement effect is weakest with
<Mode 1> and strongest with <Mode 3>.
Off
Mode 1
Setting Menu List
316
To Next Page
Loading...
