Department ID Management On/Off
Display Job Log
Use as USB Device
Notify to Check Paper Settings
Secure Print Settings
*3
PDL Selection (Plug and Play)
Initialize All
Initialize All Data/Settings
Initializes the area where data including logs and settings are stored. Perform this as necessary, for example in
such cases as when you want to dispose of the machine after erasing all usage logs. When initializing is
complete, the machine restarts automatically.
<System Management Settings> <Initialize All Data/Settings> <Yes>
● To use the machine after initializing, it is necessary to specify all settings again from scratch.
Setting Menu List
346
To Next Page
Loading...
