Canon MF231 - Setting up Connection Using WPS Push Button Mode

Setting Up Connection Using WPS Push Button Mode
15A8-03F
If your wir
eless router supports WPS push button mode, you can easily set up a connection with a WPS button.
How to operate the wireless router may vary on each device. See the instruction manuals for your networking
de
vice for help.
1
Press
.
2
Use / to select <Network Settings>, and press .
● If a scr
een for entering a PIN is displayed, enter the PIN with the numeric keys and press
. Setting
the System Manager PIN
(P. 229)
3
Select <Wireless LAN Settings>, and press
.
● If the <Enable the wir
eless LAN?> message is displayed, select <Yes>, and press
.
● If the <Dir
ect Connection will be disabled. Is it OK?> message is displayed, select <Yes>, and press
.
4
Read the message that is displayed, and press .
5
Select <WPS Push Button Mode>, and press
.
6
Select <Yes>, and press .
7
Press and hold the WPS button on the wireless router.
The button must be pressed within 2 minutes after pressing
in step 6.
● Depending on the networking de
vice, you may need to press and hold the button for 2 seconds or longer.
See the instruction manuals for your networking device for help.
Network (MF244dw / MF232w)
172