Canon MF231 - Auto Detect

<Network Settings> <Dedicated Port Settings> Select <Off> or
<On>
Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network envir
onment.
Setting a
W
ait Time for Connecting to a Network(P. 211)
0
to 300 (sec.)
Ethernet Driver Settings
Select the communication mode of Ethernet (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX).
You can also view the MAC address of the machine.
Auto Detect
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Conguring Ethernet Settings(P
. 208)
Off
Communication Mode
Half Duplex
Full Duplex
Ethernet T
ype
10BASE-T
100BASE-TX
On
MAC Address
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
the MA
C Address for Wired LAN(P. 194)
IEEE 802.1X Settings
Enable or disable IEEE 802.1X authentication. Conguring IEEE 802.1X Authentication
(P. 252)
Off
On
Initialize Network Settings
Select to r
eturn the Network Settings to the factory defaults.
Initialize Menu(P. 337)
Setting Menu List
296