Canon MF247dw - Configuring Scan Settings (Sending E-Mail)

Conguring Scan Settings (Sending E-Mail)
1469-06U
Before conguring the machine for scanning to e-mail, check the setup ow shown below.
Make sure that the machine and the computer are correctly connected.
Connecting to a Wireless LAN (MF249dw / MF247dw)(P. 319)
Connecting to a Wired LAN(P. 318)
Make sure that you have the following information:
● The IP address of the machine. Viewing Network Settings(P. 344)
● An e-mail address to be registered as a destination.
● Information about the e-mail server, including the SMTP server name, port
numbers, whether authentication is required, and the user name and password
for authentication.
● For more information about the e-mail server settings, contact your Internet
service provider or Network Administrator.
Make sure that the computer meets the following system requirements for the
Send Setting Tool(sending e-mail):
● Operating system
Windows Vista/7/8/10/Server 2008/Server 2012
● Web browser
Microsoft Internet Explorer 7.0 or later
● Display
SVGA monitor (with at least 800 x 600 pixel screen resolution) that supports at
least 256 colors
● Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.
Disabling HTTP Communication (P. 423)
Disabling Remote UI (P. 424)
Set the machine conguration.
● Conguring Basic E-Mail Settings Conguring Basic E-Mail Settings(P. 359)
● Conguring E-Mail Receiving Settings Conguring E-Mail Communication
Settings(P. 363)
● Conguring Detailed E-Mail Communication Settings (Authentication, Encryption,
etc.) Conguring E-Mail Communication Settings(P. 363)
Network
358