Canon MF247dw - Adjusting the Volume

Adjusting the Volume
1469-016
The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or
error occurs. You can set the volume of each of these sounds individually.
1
Press and tap <Menu>.
2
Tap <Preferences>.
3
Tap <Volume Settings>.
4
Select a setting.
Setting Description Procedure
<Fax Tone>
Sound produced during a fax transmission
● Go to step 5.
<Ring Tone>
Sound produced when an incoming fax is
received
<TX Done Tone>
Sound produced when fax sending is complete
● Go to step 5.
<RX Done Tone>
Sound produced when fax receiving is
complete
<Scanning Done Tone>
Sound produced when fax document scanning
is complete
<Entry Tone>
Conrmation sound each time a key on the
operation panel or button on the display is
pressed
● Select <On> (produce a tone) or
<Off> (not produce a tone).
<Invalid Entry Tone>
Sound produced when an invalid key
operation is performed, such as when you
enter a number outside the valid setting range
<Warning Tone>
Sound produced when a paper jam or other
error occurs
<Job Done Tone>
Sound produced when an operation such as
copying or scanning is complete
<Energy Saver Alert>
Sound produced when the machine enters or
exits sleep mode
Basic Operations
72