8
Enter the destination using the numeric keys and tap <Apply>.
Making detailed settings (only when registered for fax)
After tapping <Details>, a screen similar to the following is displayed.
<ECM TX>
If an error occurs in an image that is being sent, the error is checked and corrected to prevent an improper
image from being sent when setting <On>.
<TX Speed>
If it takes time for transmissions to start, such as when there is a poor telephone connection, you can adjust
the transmission start speed downward incrementally starting from "33600 bps".
<Long Distance>
Specify <International (1) > to <International (3)> according to the transmission conditions when registering
overseas fax numbers.
You can also make detailed settings for destinations from <Menu> <Fax Settings>. However, settings
made from <Addr. Book> are enabled for the detailed settings of destinations registered in the Address
Book.
9
◼ Editing the Content of Registered Destinations in One-Touch Dial
After registering destinations, you can change the content of registered information. For example, you can change the
fax number or name of a registered destination, change the type from fax number to e-mail, change the numbers
registered to One-Touch Dial, and so on.
1
Press
and tap <Addr. Book>.
Basic Operations
66
To Next Page
Loading...
