MAX370M
9
28. The maximum rotation speed marked on the saw blade must not be exceeded.
29. The machine shall not be loaded with more than work piece at a time.
30. During making wooden cases, it will emit harmful dust.
User must install exhaust system for the extraction of harmful dust.
31. Use correctly sharpened saw blades.
Observe the maximum speed marked on the saw blade. User shall be to select the optimum
speed for saw blade.
32. Report faults on the machine, including guards or saw blades, as soon as they are
discovered.
33. Follow safe procedures for cleaning, maintenance and removing chips and dust regularly to
avoid the risk of fire.
34. Follow the manual for operation, adjustment and repair of saw blades.
35. Ensure all spacers and spindle rings used are suggested by the manufacturer.
36. Refrain from removing any off-cut or other part of the work piece from the cutting area
whilst the machine is running.
37. Ensure that guards and other safety devices necessary for machine operation are in position,
in good working order and properly maintained.
38. Safety working practice.
39. Guide the work piece along the rip fence and through the rotation saw blade, using the push
stick if necessary.
Any damage, please replace new one that specification according below drawing.
40. Do not operate this machine while tired or under the influence of drugs, alcohol or any
medication.
41. The dust generated by certain woods products can be injurious to your health.
Always operate machinery in well-ventilated areas, and provide for proper dust removal. Use
wood dust collection systems whenever possible
42. Any other maintenance is welcome to be contacted manufacturer or our distributor.
To Next Page
