Cantek MX370M - Disassemble Glue Pot and Clean

MAX370M
36
6.3.3 Disassemble glue pot and clean
※Ensure glue shaft tilt to the right side to avoid glue leakage when you reassemble it.※
1. Loosen 4 screws on Fig. 6.2.B.
2. Pull out heating element and glue upper set on Fig. 6.2.C
3. Clean glue shaft and glue pot
1
2
4
3
Fig. 6.2.B
Fig. 6.3.E
I