MAX370M
5
1. General Information
All of content in this manual book was applied by supplier, ensure you understand every step
during operation. If you need more information or service, please contact your local agent for help.
Provide the following information (solve your problem faster):
Machine model
Serial number
Purchase date
Approximate number of working hours
Effect only adjustments and maintenance operations on machine as indicated in this manual.
Machine Performance
The MAX 370M has the function to edge band straight panels with automatic feed and spread glue
directly on panels with edges thickness from 0.4 to 3mm.
Front and rear trimming cut-off can be made together with flush trimming and buffing unit on both
sides of work-piece.
MAX 370M is packed with features including pre-milling, pre-heating, end trimming/corner rounding,
flush trimming, radius scraping, buffing unit, and glue scraping (optional).
Lifting and transport
Preferably use a forklift or trans-pallet to handle transport of machine. To avoid any accident
during transport, make sure the machine is firmly secured to the forklift with ropes or other
suitable systems. The machine can be lifted with ropes, belts or slings, adequate to the machine
weight, and hooked on.
To Next Page
