MAX370M
7
2. Safety Precautions
1. Read instruction manual before operating the machine for your safety.
People who operate the machine must read and understand how to use the safety measures,
and execute the regulation stated in this manual. Learn the application and limitations of the
machine.
2. Ground all machines.
It should make sure the “PE” terminal being connected before operating the machine.
3. Keep guards in place and working area clean.
4. Do not use in dangerous environment.
Do not use machine in damp or wet location, or expose it under water.
Please provide a suitable illumination around the machine for safety operation.
5. Keep children and visitors away.
All children and visitors should be kept in a safe distance from working area.
6. Store idle tools (cutting spindle).
When not in usage, tools should be stored in a dry, high or locked up place, and out of reach
for children.
7. Wear proper apparel.
No loose clothing, glove, neckties, rings, bracelets, or other jewelry which may be gotten
caught in moving parts. Wear protective hair covering to contain long hair.
Please wear glove to take / replace saw blade and wear eye-shield / ear-shield to operation.
8. Stay alert.
Watch what you are doing. Do not operate machine when you are tired.
9. Don't force machines.
It will do the job better and be safer at the rate for which it was designed.
10. SHUT OFF the power.
Remove the product and isolated energy before leaving the machine. Shut off the power and
carried out only when the machine is stationary before inspection, maintenance, adjustment
and cleaning.
11. No smoking!!
Do NOT smoke while operating machine.
12. Have your machine repaired by a qualified person.
Repair should be carried out by qualified person and use original spare parts. Otherwise this
may result in considerable danger to the users.
13. Check any damaged parts.
Before using the machine further, the guard or other damaged part should first be carefully
checked whether it is able to operate properly and perform its intended function. Check the
alignment of moving parts, blind of moving parts, breakage of parts, mounting, and any other
To Next Page
