Capron A72 User Manual

Living
Capron - 3141417 - 03/20 - EHG-0021-02EN 77
7
7.10.2 Front bench seat with divan
 Do not stand on the bedding box extension when it is pulled out. The
bedding box extension may be damaged thereby.
Fig. 85 Prior to conversion Fig. 86 During conversion
Fig. 87 After conversion
 Depending on the model, insert an additional floor plate at the step to
the driver's area to obtain an even seating area.
 Remove the back cushion and the seat cushion of the divan and lay
them aside.
 Convert the suspension table into a bed foundation (see section 7.6.1).
 Fold the seat base of the divan upwards.
 Pull up the bedding box extension on the divan.
 Pull out the bedding box extension on the divan all the way.
 Fold down the seat base of the divan.
 Unfold the seat base of the divan.
 Place the seat cushion of the divan on the bedding box extension of the
divan.
 Place the back cushion of the divan between the seat cushion and the
exterior wall.
 Lay the seat cushion of the front bench seat on the table top.
 Place two short additional cushions in front of the seat cushion.
 Lay the long additional cushion onto the bedding box extension.

Capron A72 Specifications

General

Brand	Capron
Model	A72
Category	Caravans
Language	English