Capron A72 User Manual

Living
78 Capron - 3141417 - 03/20 - EHG-0021-02EN
7
7.10.3 Front bench seat with lengthwise seat
 Do not stand on the bedding box extension when it is pulled out. The
bedding box extension may be damaged thereby.
Fig. 88 Prior to conversion Fig. 89 During conversion
Fig. 90 After conversion
 Model T: Insert additional floor plate on the step to the driver's area to
obtain an even seating area.
 Remove the back cushion and the seat cushion of the lengthwise seat
and lay them aside.
 Convert the lift-off table as a bed foundation (see section 7.6.2).
 Fold the seat base of the lengthwise seat upwards.
 Lift the bedding box extension on the lengthwise seat slightly.
 Pull out the bedding box extension on the lengthwise seat as far as it will
go.
 Fold the seat base of the lengthwise seat down.
 Unfold the seat base of the lengthwise seat.
 Place the seat cushion of the lengthwise seat on the bedding box exten-
sion.
 Place the back cushion of the lengthwise seat between the seat cushion
and the exterior wall.
 Lay the seat cushion of the front bench seat on the table top.
 Lay the additional cushion onto the bedding box extension.

Capron A72 Specifications

General

Brand	Capron
Model	A72
Category	Caravans
Language	English