7.10
Menu E. Settings
- i. Logout
7.10.1 Logout from the settings menu (Installer and Service menu)
To logout, use the icon available in the “Settings” menu
Fig.7.n
In “character terminal” mode, screen EI01 screen is used to exit the Settings menu and logout. The screen
also describes the type of login performed (installer or service). When accessing this screen, the following
information will be shown (in the currently selected language). “To log out, press "ENTER””: the main
screen will then be shown again. Press “ESC” to exit if not wanting to end the session.
7.11
Touch display:
software update
To update the touch display, simply enter the system menu (from the home page), Settings menu and
enter the password. The following screen will be displayed:
Fig.7.o
Plug the USB key into the display (the mini USB port on the display is accessible from inside the electrical
panel (outdoor model) or from inside the panel (indoor model), the “update display” menu will be
shown. Click this menu and follow the steps described on the display to update the software.
To Next Page
Loading...
