9. Web server
9.1
Integrated web
server
The integrated web server is used to configure and monitor the main unit parameters directly from a PC.
In fact, using the Ethernet port on the humidifier controller, the unit can be accessed via a local network
by simply entering its IP address in the browser.
Fig.9.a
To log in and access the various menu items, use the installer or service password (see the chapter “Start-
up and user interface”).
9.2
Connecting to
the integrated
web server
For the physical connection to the controller from a PC, must use the RJ45 Ethernet port on the c.pHC
and an Ethernet category 5 cable.
Fig.9.b
Location of the Ethernet port on the c.pHC controller.
Fig.9.c
The PC and the humidifier controller (or all controllers, for Master/Slave systems) must be part of the
same subnetwork.
The default network configurations for the c.pHC are:
l unit’s IP address: 192.168.0.1;
l subnet mask: 255.255.255.0;
l gateway: 192.168.0.1.
For example, the PC’s network settings can be changed as follows:
l unit’s IP address: 192.168.0.2
l subnet mask: 255.255.255.0
l gateway: 192.168.0.1
To Next Page
Loading...
