CS 7200 User and Installation Guide (6M0940)_Ed04 41
5 Acquiring Images
Image Acquisition Workflow
This chapter describes the acquisition procedure for acquiring dental images.
A typical workflow consists of the following steps:
1 Selecting or Creating a Patient Record and Accessing the imaging window. See “Starting the Imaging
Software” on page 42.
2 Inserting the Imaging Plate into a hygienic sheath and sealing it. See “Preparing the Imaging Plates” on
page 43.
3 Positioning, exposing and removing the imaging plate from the patient’s mouth . See “Performing the
X-rays” on page 44.
4 Disinfecting the Hygienic Sheath. Refer to the CS 7200 Safety and Regulatory Guide (6K9678).
5 Scanning the imaging plate and reviewing the image. See “Scanning Imaging Plate” on page 47.
To Next Page
Loading...
