3–31 62-12259
3.20 Stopping The Unit
To stop the unit, place the START/RUN-OFF switch in the OFF position. The unit will shutdown immediately, while
the system completes a shutdown sequence and then the display will go blank. The engine will stop and the dis-
play will turn off.
NOTE
The system will close the compressor suction modulation valve (CSMV) and evaporator expansion
valve (EVXV) to 0% open before turning off.
NOTE
Due to internal processing, turning the START/RUN - OFF switch OFF and then back to the START/
RUN position will result in a 4- to 50-second delay between the display going off and coming back on
again.
START/STOP DIESEL COOL
BOX TEMPERATURE
o
F SETPOINT
o
F
STATUS OK
34.3
34
SROS
To Next Page
Loading...
