3–5 62-12259
3.5 Switching Operating State
WARNING
!
Do not connect power plug to any electrical outlet without checking that it meets the 460/3/60
and 30 Amp electrical requirements of the unit.
WARNING
!
Ensure the power plug is clean and dry before connecting to any electrical outlet/receptacle.
Standby Electrical Guidelines
NOTE
The unit is equipped with automatic phase reversal which ensures that the electric motors will run in
the correct direction.
for safe, reliable operation in Electric Operation, it is important to consider the following guidelines:
• The power supply cable and circuit breaker must comply with local electrical code and unit specifications.
• The power supply cable must be equipped with a ground connection.
• Repairs or maintenance to the supply voltage circuit should only be performed by licensed/authorized
personnel.
START/STOP DIESEL COOL
BOX TEMPERATURE
o
F SETPOINT
o
F
STATUS OK
34.3
34
If DIESEL is displayed, the unit is in Engine Operation.
To Next Page
Loading...
