Carrier RTU Open v3 - Appendix C: RTU Open Points;Properties on the Equipment Touch; Navigation Screens

Appendix C: RTU Open Points/Properties on the Equipment Touch
RTU Open v3 CARRIER CORPORATION ©2019
Installation and Start-up Guide All rights reserved
93
NOTE
Engineering units shown in this document in the defaults and ranges are strictly for reference. You must
enter an integer only.
Navigation screens
Screen Names
Display
Details
Standby
Screen displays after the
Inactivity Timer
expires
(default is 5 minutes).
Displays:
• Space temperature
• Current setpoints
• Mode
• Occupancy
• OAT, if available
Not an interactive screen. Touch anywhere to advance
to
Home
screen.
Home
Displays:
• Space temperature
• Current setpoints
• Mode
• Occupancy
• OAT, if available
Allows:
• Pushbutton Override
• Space Setpoint Offset Adjustment
Click
on the right to navigate to
Snapshot
screen.
Appendix C: RTU Open Points/Properties on the Equipment Touch