CHAPTER 2 - SAFETY, DECALS, AND HAND SIGNALS
2-9
6-34551NA Issued 8-04 Bur
DECALS
NOTE: When you clean the decals, use only a cloth,
water and soap. Do not use solvents, gasoline, etc.
NOTE: This chapter only covers decals relating to
safety and machine operation and servicing. For
information on all decals for the machine, consult
your authorized dealer.
KHP1537-00
Figure 6
This 3 panel decal explains the Danger of
electrocution, the importance of reading and
understanding the operator’s manual and that
attachment interference may cause damage to the
operator’s compartment.
BS00M141
Figure 7
This decal warns of Danger and to keep clear of
swinging upperstructure to prevent serious bodily
injury.
KHP1533-00
Figure 8
This decal warns of the hazard associated with
rotating parts and components.
Figure 9
KHP1013
Figure 10
This decal instructs the operator to use diesel fuel
only.
KHP1535
Figure 11
This decal cautions that some surfaces may cause
burns.
WARNING: An illegible or missing decal can
have far-reaching consequences. Inspect
decals daily.
WARNING: Make sure that the decals are
perfectly legible, clean them regularly and
replace decals that are destroyed, lost,
painted over or no longer legible, with new
ones. When parts bearing decals are
replaced, be sure to put new decals on each
new part.
To Next Page
Loading...
