CHAPTER 5 - LUBRICATION, FILTERS, AND FLUIDS
5-4
Issued 8-04 Bur 6-34551NA
Check that the upper and lower rollers and the
idler wheels are not leaking oil.
ATTACHMENT
Check for oil leaks on the cylinders.
Check the condition of all lines.
Check the condition of the bucket teeth.
AFTER STARTING THE ENGINE
Did the engine start correctly? Are the exhaust
fumes normal? Any strange noises?
Check for abnormal noise on the hydraulic
components.
Check for water or oil leaks on the components.
Check the audible alarm devices, working lights
and windshield wipers.
Check that all circuits (travel, swing and tool) are
functioning correctly.
IMPORTANT: If the slightest defect is found, repair it
immediately before using the machine or see your
Dealer.
HOURMETER
The hourmeter enables service operations to be
scheduled. Its hourly indications are the same as
those of a clock when the engine is running.
Servicing intervals are carefully calculated to
guarantee safe and efficient machine operation.
Be sure to carry out all the servicing operations
properly as defined in this manual.
CT02C243
Figure 1
To Next Page
Loading...
