Chamberlain Elite EL2000 - Page 6

Page 5
Quick Reference Guide
Quick Reference Guide
Quick Reference
28 71 Restore Factory Settings 28 # 101010 #
29 71 Reset the Unit 29 # 101010 #
30 50 Create a Time Zone 30 # (time zone number, 2-63) #
(segment number; 99) # (starting
time=hhmm; 99) # (ending time=hhmm) #
(day of week, 1-8; 1=Sunday; 7=Saturday;
8=holiday) #
31 51 Assign Door Auto Lock/Unlock Schedule Disabled 31 # (door 1-4) # (time zone, 2-63; 99) #
32 50 Setting Holidays 32 # (1=add, 2=verify, 0=delete) #
(yymmdd; yy=year, mm=month, dd=day
of the month) #
40 29 Add a Basic Directory Code Enabled 40 # (directory code) # (phone number) #
(phone extension) #
41 30 Add or Edit a Full Function Directory Code 41 # (directory code) # (phone number) #
(phone ext) # (DnD schedule number,
0-63) # (enable/disable call fwd) # (call
fwd schedule number, 0-63) # (new call
fwd phone number) # (call fwd
phone ext) #
44 30 Change a Directory Code ONLY 44 # (new directory code) # (directory
code to change) #
45 32 Activate/Deactivate a Directory Code 45 # (directory code) # (0=deactivate;
1=activate) # (0=don’t use start; 1=use
start) # (Start Date=yymmdd) # (Start
Time=hhmm) # (0=don’t use end; 1=use
end) # (End Date=yymmdd) # (End
Time=hhmm) #
46 31 Enable/Disable Call Forwarding Disabled 46 # (directory code) # (0=disable;
(Directory Calls) 1=enable) # (schedule number, 0-63) #
(new call forward phone number) #
(call forward phone extension) #
47 33 Verify a Directory Code 47 # (directory code) #
48 30 Delete a Directory Code 48 # (directory code) #
49 31 Enable/Disable Call Forwarding and Do Disabled 49 # DnD Enable (1)/Disable (0) # DnD
Not Disturb Schedule with Schedule (0-63) # Call Forward
Residence "Call Button" Only Enable/Disable (0=disable; 1=enable) #
Call Forward Schedule (schedule
number, 0-63 # (new call forward
phone number) # (call forward phone
extension) # (call forward extension
delay, 0 to 30 sec.) #
50 35 Add a Basic Entry Code 50 # (entry code) #
51 36 Add/Edit a Full Function Entry Code 51 # (entry code) # (schedule for door 1,
0-63) # (schedule for door 2, 0-63) #
(schedule for door 3, 0-63) # (schedule
for door 4, 0-63) #
54 36 Change Entry Code ONLY 54 # (entry code to change) # (new entry
code) #
55 38 Verify an Entry Code 55 # (entry code) #
56 38 Activate/Deactivate an Entry Code 56 # (entry code) # (0=deactivate;
1=activate) # (0=don’t use start; 1=use
start) # (Start Date=yymmdd) # (Start
Time=hhmm) # (0=don’t use end; 1=use
end) # (End Date=yymmdd) # (End
Time=hhmm) #
Programming
Number
Page Description of Task
Factory
Setting
Programming
Procedure