Chamberlain Elite EL2000 - Page 70

Page 69
Direct Commands From The Phone
Direct Commands From The Phone
Direct Commands from Your Phone (continued):
1
Press from the residence phone. The unit is now prepared to accept a direct
command.
2
Enter the Unit ID code (if applicable).
3
Select one of the following options:
Get Door Status:
Press
DEFABC
then
Hear the status for a specified door. The status
is open when the door is currently latched open
or in the unlock portion of an automatic time
zone. The status is closed for all other times.
Release Door:
Press
GHIABC
then
Cancels command set by Step 122 and returns
to previous schedule (if applicable). NOTE: A
Call Forwarding phone number and time zone
must be in place in order for this to function.
Enable/Disable Call Forwarding For Residence:
Press
1 2
ABC
5
JKL
then enable or disable then
Enable/Disable Do Not Disturb For Residence:
Press
1 2
ABC
6
MNO
then enable or disable then
4
Select the Door (1-4) that you want to control. Press . NOTE: If no door is selected
then Door 1 is used.
1
Press from the residence phone. The unit is now prepared to accept a
direct command.
2
Enter the Unit ID code (if applicable).
3
Select one of the following options:
4
Select the Door (1-4) that you want to control. Press . NOTE: If no door is selected
then Door 1 is used.
1
Press from the residence phone. The unit is now prepared to accept a
direct command.
2
Enter the Unit ID code (if applicable).
3
Select one of the following options:
1
Press from the residence phone. The unit is now prepared to accept a
direct command.
2
Enter the Unit ID code (if applicable).
3
Select one of the following options:
NOTE: For Steps 125 and 126 a valid time zone must be in place in order for their commands to
function.
123
124
125
126