Check Point QUANTUM SPARK 1600 - To create a network object of type Device; To edit a network object; To delete a network object; To filter for a specified network object

Managing Network Objects
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|294
To create a network object of type Device:
1. Click New or Add.
The New Network Object window opens.
2. In Type, select Device.
3. In Host MAC address, enter the MAC address.
4. Optional: Select Bypass host with this MAC by SSL Inspection.
5. In Object name, enter the applicable text.
If you select to Use custom hardware name, configure:
n
Device type - Select from the pull-down menu.
n
Hardware
n
Operating system
6. Click Apply
To edit a network object:
1. Select a network object from the list.
2. Click Edit.
3. Make the necessary changes.
4. Click Apply
To delete a network object:
1. Select the network object from the list.
2. Click Delete.
3. Click Yes in the confirmation message.
To filter for a specified network object:
1. In the Type to filter box, enter the name of the network object or part of it.
2. As you enter text, the list is filtered and shows matching results.