Check Point QUANTUM SPARK 1600 - To add a new network object and bypass SSL inspection based on the host MAC address (locally managed only)

Managing Network Objects
Quantum Spark 1500, 1600, and 1800 Appliances R81.10.X Locally Managed Administration Guide|295
To add a new network object and bypass SSL inspection based on the host MAC address (locally
managed only):
1. Click New.
The New Network Object window opens.
2. In Type, select Device.
3. In Host MAC address, enter a custom value or select from the menu.
4. Select Bypass host with this MAC by SSL inspection.
5. In Object name, enter the applicable text.
6. Click Apply
Note - You can also do this on the Home >Active Devices page. Click Save as and select
Device type Network Object.