Operating instructions
CF Control 100
1 General Information
1.1 General information
This manual contains instructions for the installation, commissioning, maintenance and repair of the
Chemoform control system.
The safety instructions and notes in bold type are to be observed at all times!
1.2 Notes in bold
In this technical information, the bold headings CAUTION, WARNING and NOTE have the following
meaning:
CAUTION: This heading is used if failure to observe the operating or working instructions or
prescribed procedures, or incorrect observation of such instructions and the like can
lead to accident or personal injury.
WARNING: This heading is used if failure to observe the operating or working instructions or
prescribed procedures, or incorrect observation of such instructions and the like can
lead to damage to the equipment.
NOTE: This heading is used to draw special attention to important points.
1.3 Warranty
The manufacturer guarantees the operational safety and reliability of the system only if the following
conditions are observed:
- Installation, connection, setting, maintenance and repairs are carried out by authorized and
qualified specialist personnel only.
- Only original replacement parts are used for repairs.
- The CF Control 100 is used in accordance with the instructions given in this manual.
WARNING: The use of concentrated hydrochloric acid in the immediate vicinity of our equipment
invalidates the guarantee!
Wearing parts are not subject to warranty (see table in chapter 17).
To Next Page
Loading...