ECO 2 Ultrasound Diagnostic System
Page 188 / 189
Set up in system
IP set up
1. First, confirm the service address of shared files, you can get the IP address in windows
interface.
In windows “start”-“run” type in “cmd” and enter, then type in “ ipconfig” and enter, you can see the
IP address of local service.
2. Enter into set up interface, choose net. Choose “DHCP”(automatically get the IP address)or
“static”(type in IP address manually);
Tips: if you want to type in IP address manually, make sure the IP address is in the same
internet section with the service, and won’t confused with other IP in the LAN.
To Next Page
Loading...