Local Operation
4.6.5 Running the Program Sequences Function
Press the key ON to run program when program sequences function is selected. The
VFD display goes to the voltage and current measurement, and program sequences run
display mode. The display shows as follows.
[ 01-004 CCM RUN ]
4.9963V
1.3686A
Once the execution of Auto sequences is done, the panel will show the items not within the
specifications.
[ SPEC. NG SEQ ]
01-001 01-002
01-003
01: It means Program 01.
001: It means Sequence 01.
002: It means Sequence 02.
4.6.6 MPP Tracker
[ ADVANCE ]
1.TIMING
2.SINE WAVE DYNA
3.OCP TEST
4.AUTO SEQUENCES
[ ADVANCE ]
5. MPP TRACKER
6. USER DEF. WAVE
Press the key ON to run MPP Tracker function.
To Next Page
Loading...
Need help?
General
