Chroma 63600 Series User Manual

Programmable DC Electronic Load 63600 Series Operation & Programming Manual
5-48
:
SWEep
:FSTArt
:
FEND
:
FSTEp
:
FALL
:IMINimum
:
IMAXimum
SP
<NRf
+
>
?
SP
MAX
MIN
SP
<
NRf+
>
?
SP
MAX
MIN
<NR2>
Suffix
<
NR
2>
<
NR2
>
<
NR2
>
<NR
2
>
<
NR2
>
:RISE
Suffix
:CURRent
SP
<
NRf
+>
?
SP
MAX
MIN
<
NR2
>
<NR2
>
<NR
2>
Suffix
:DUTY
:
DWELl
SP
<NRf
>
?
SP
MAX
MIN
<NR
2
>
<
NR2
>
<NR2
>
SP
<
NRf+>
?
SP
MAX
MIN
<NR2>
<NR2>
<NR2>
Suffix
CURRent:DYNamic:FALL
Type: Channel-Specific
Description: Set the falling slew rate of current for constant current dynamic
mode.
Setting Syntax: CURRent:DYNamic:FALL<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: CURR:DYN:FALL 2.5 Set falling slew rate to 2.5A/μs.
CURR:DYN:FALL 1A/μs Set falling slew rate to 1A/μs.
CURR:DYN:FALL MAX Set falling slew rate to the maximum
value of dynamic load.
CURR:DYN:FALL MIN Set falling slew rate to the minimum
value of dynamic load.
Query Syntax: CURRent:DYNamic:FALL?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = A/μs]
Query Example: CURR:DYN:FALL?
CURR:DYN:FALL? MAX
CURR:DYN:FALL? MIN
CURRent:DYNamic:L1
Type: Channel-Specific
Description: Set the load current during T1 period for constant current dynamic
mode.
Setting Syntax: CURRent:DYNamic:L1<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.

Chroma 63600 Series Specifications

General

Series	63600
Operating Temperature	0°C to 40°C
Modes	CC, CV
Interface	GPIB, USB
Protection	OCP, OTP, OVP
Voltage Resolution	1mV
Cooling	Forced Air