Chrysler Dodge Caravan 2002 - SPECIFICATIONS; BRAKE ROTOR; BRAKE ROTOR - EXPORT

tion, then repeat the tightening sequence to the full
specified torque of 135 N·m (100 ft. lbs.).
(5) Lower vehicle to the ground.
SPECIFICATIONS
BRAKE ROTOR
When refacing a rotor, the required TIR (Total
Indicator Reading) and thickness variation limits
MUST BE MAINTAINED. Extreme care in the oper-
ation of rotor turning equipment is required.
LIMITS/SPECIFICATIONS
Braking Rotor Rotor Thickness
Minimum
Rotor
Thickness
Rotor
Thickness
Variation
Rotor
Runout*
Front Rotor -
Disc/Drum
Brakes (TRW)
27.87–28.13 mm
1.097-1.107 in.
25.3 mm
0.996 in.
0.009 mm
0.0004 in.
0.035 mm
0.0014 in.
Front Rotor -
Disc/Disc Brakes
(Teves)
27.90–28.10 mm
1.098-1.106 in.
25.3 mm
0.996 in.
0.008 mm
0.0003 in.
0.035 mm
0.0014 in.
Rear Rotor
12.4–12.6 mm
0.488 -0.496 in.
11.25 mm
0.443 in.
0.013 mm
0.0005 in.
0.14 mm
0.0055 in.
*
TIR Total Indicator Reading (Measured On Vehicle)
BRAKE ROTOR - EXPORT
NOTE: Use the following information on all 4 wheel
disc brake vehicles that are equipped with BR3
sales code.
When refacing a rotor, the required TIR (Total
Indicator Reading) and thickness variation limits
MUST BE MAINTAINED. Extreme care in the oper-
ation of rotor turning equipment is required.
LIMITS/SPECIFICATIONS
Brake Rotor Rotor Thickness
Minimum Rotor
Thickness
Rotor
Thickness
Variation
Rotor Runout *
Front
27.9-28.1 mm
1.098 -1.106 in.
26.5 mm
1.043 in
0.010 mm
0.0004 in.
0.080 mm
0.0031 in.
Rear
12.4-12.6 mm
0.488-0.496 in.
11.25 mm
0.443 in.
0.013 mm
0.0005 in.
0.14 mm
0.0055 in.
* TIR Total Indicator Reading (Measured On Vehicle)
RS BRAKES - BASE 5-63
ROTOR (Continued)