SPECIFICATIONS
COOLING SYSTEM CAPACITY
Engine Coolant Capacity*
2.4L 10.7 L (11.4 qts.)
3.3/3.8L (without
rear heater)
12.6 L (13.4 qts.)
3.3/3.8L (with rear
heater)
15.4 L (16.3 qts.)
*Includes Heater and Coolant Recovery System
ACCESSORY DRIVE BELT TENSION
ACCESSORY
DRIVE BELT
TENSION
2.4L ENGINE
Air Conditioning
Compressor/
Generator
Dynamic Tensioner
Power
Steering
New
Belt
534 - 756 N
183 - 218 Hz
(120 - 170
lbs.)
Used
Belt*
356 - 534 N
150 - 183 Hz
(80 - 120 lbs)
*Belt is considered used after 15 minutes of run-in
time
3.3/3.8L ENGINES
Air Conditioning
Compressor
Dynamic
Tensioner
Generator/Water
Pump/Power
Steering
TORQUE
DESCRIPTION N·m
Ft.
Lbs.
In.
Lbs.
Accessory Drive Belt Tensioner
Assembly (3.3/3.8L)—Bolt
28 — 250
Engine Coolant Temperature
Sensor
(2.4 & 3.3/3.8L) 7 — 60
Generator & A/C Compressor Drive
Belt Tensioner Assembly (2.4L)—
Bolt
54 40 —
Coolant Outlet Connector/
Thermostat Housing
(2.4 & 3.3/3.8L)—Bolts 28 — 250
Water Pump
(2.4 & 3.3/3.8L)—Bolts 12 — 105
Water Pump Inlet Tube (2.4L)—
Bolts
12 — 105
Water Pump Inlet Tube (3.3/3.8L)—
Bolts
28 — 250
Water Pump Pulley (3.3/3.8L)—
Bolts
28 — 250
Radiator to A/C Condenser—
Screws
5—45
Radiator Fan—Screws 5 — 45
Radiator Mounting (Upper
Bracket)—Nuts
12 — 105
7 - 6 COOLING RS
COOLING (Continued)