CipherLab RS30 - Share WWAN Data

69
Chapter 4 Wireless Radio
EDIT ACCESS POINT NAME
You may need to change the access point name according to the information obtained from
your mobile carrier.
1) Tap Home | Settings | Mobile networks.
2) On the Network settings page, tap Access Point Names.
3) Tap the settings button , and tap New APN in the pop-up menu.
4) Tap each field to input the APN name and settings obained from your mobile carrier.
5) When finished, tap the settings button and tap Save.
6) Tap the radio button next to the APN you would like to apply.
4.1.1.
SHARE WWAN DATA
The WWAN connection on the mobile computer can be shared to other devices. You may
share internet connection with a computer or device through USB or Bluetooth tethering, or
share with a maximum of eight devices by turning the mobile computer into a Wi-Fi hotspot.
BLUETOOTH TETHERING
To share data connection through Bluetooth tethering:
1) Pair the mobile computer with the device of interest.
2) Tap Home | Settings | More… | Tethering & portable hotspot.
3) Tap Bluetooth tethering. The mobile computer will share its WWAN network with
Bluetooth-connected devices.
4) To disable data connection through Bluetooth sharing, uncheck the Bluetooth
tethering checkbox.
USB TETHERING
To share data connection through USB tethering:
1) Connect the mobile computer with a USB cable. A USB icon will appear at the top of the
screen, and in the Notifications panel, a description “Connected as USB Storage” will
appear.
2) Tap Home | Settings | More… | Tethering & portable hotspot.
3) Tap USB tethering. The mobile computer will share its WWAN network with the
connected host computer.
WI-FI HOTSPOT
To share data connection in the form of a Wi-Fi hotspot:
1) Tap Home | Settings | More… | Tethering & portable hotspot.
2) Tap the Wi-Fi hotspot switch to enable data sharing through Wi-Fi. The mobile
computer will start broadcasting its SSID for other devices to connect.