4.9.15. DELETING MAXIMUM AND MINIMUM VALUES
On this screen you select whether or not to delete the maximum
and minimum values
Press key
for 3 seconds to edit the selection. The prog icon
will be displayed on the bottom of the screen.
Press key
to browse the two options (Yes and No).
To validate the data, press
for 3 seconds and the prog icon will disappear from the display.
Press key
to access the next programming step.
4.9.16. DELETING ENERGY VALUES
On this screen you select whether or not to delete the energy
values
Press key
for 3 seconds to edit the selection. The prog icon
will be displayed on the bottom of the screen.
Press key
to browse the two options (Yes and No).
To validate the data, press
for 3 seconds and the prog icon will disappear from the display.
Press key
to access the next programming step.
4.9.17. SELECTING THE RANGE OF ENERGIES
The operation of the range of energy is selected on this screen.
Press key
for 3 seconds to edit the selection. The prog icon
will be displayed on the bottom of the screen.
Press the
key to browse different options:
AUTO The device displays the kWh and MWh. When the energy value reaches 999999kWh,
the device automatically selects the MWh range.
SHORT The device only displays the KWh. When the energy value reaches 999999kWh, the
device resets the measurement to 0kWh.
To validate the modication of the range of energies, delete the energy values rst.
To do so, press the
validation key for 3 seconds; the energy value deletion screen will be
displayed. Select YES to delete the energy values; the device will go back to the energy range
selection screen.
54
To Next Page
Loading...
Need help?
General
