MAC
The MAC address is programmed on this screen.
Press the
key for 3 seconds to edit the value. The prog icon
will be displayed on the bottom of the screen.
To enter or modify the value, press the
key repeatedly,
increasing the value of the ashing digit.
When the desired value is shown on the screen, press the
key to go to the next digit and
modify the other values.
If you press the
key after changing the last digit, it will jump back to the rst digit so you
can modify the previously programmed values again.
Maximum programming value: 255.
Minimum programming value: 0.
To validate the data, press
for 3 seconds and the prog icon will disappear from the display.
Press key
to access the next programming step.
4.9.30. LOCKING THE PROGRAMMING
This screen is for protecting the data configured in the
programming menu.
Press key
for 3 seconds to edit the locking/unlocking
selection. The prog icon will be displayed on the bottom of the
screen.
Press key
to browse the two options:
When you enter the programming menu you can view and modify the programming. Icon
on the display indicates the permanently locked status.
When you enter the programming you can view the programming but not modify it. Icon
indicates the locking status. Enter the password to modify the programming values.
To validate the data, press
for 3 seconds and the prog icon will disappear from the display.
Press the
key to enter the password for locking and unlocking the programming:
70
To Next Page
Loading...
