Circutor CVM-C11-ITF-IN-485-ICT2 - Page 92

Standards
Electrical equipment for measurement, control and laboratory use - EMC
requirements - Part 1: General requirements
EN IEC 61326-1:2021
Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity test
EN 61000-4-2
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement
techniques - Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-3
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst immunity test
EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement
techniques - Surge immunity test
EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement
techniques - Immunity to conducted disturbances, induced by radio-frequency
fields
EN 61000-4-6
Electromagnetic compatibility (EMC) -- Part 4-8: Testing and measurement
techniques - Power frequency magnetic field immunity test
EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement
techniques - Voltage dips, short interruptions and voltage variations immunity
tests
EN 61000-4-11
Safety requirements for electrical equipment for measurement, control and
laboratory use -- Part 2-030: Particular requirements for testing and meas-
uring circuits
EN 61010-2-030
Safety requirements for electrical equipment for measurement, control and
laboratory use -- Part 1: General requirements
EN 61010-1
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500
V DC - Equipment for testing, measuring or monitoring of protective measures
- Part 12: Power metering and monitoring devices (PMD)
EN IEC 61557-12
64
96
96
67
Figure 24: Dimensions of the CVM-C11.
92
CVM-C11
Instruction Manual