Hardware Setup
11
6. Secure the expansion box to the main unit using the side latches on both sides of the tester and re-attach the cover
plates.
7. Space is available on the cover plate of each expansion box to write the adapter position. You may also consider using
removable stickers for this purpose. For example, you could continue the number system and label each adapter
position as J5, J6, J7, etc.
If you are attaching more than one expansion box, repeat the procedure. If your system uses all seven expansion boxes, you
will need to purchase a second cable. Contact your account manager at Cirris for more information and to purchase this
cable.
To Next Page
Loading...
