Cirris 4200 - Edit Point Labels

32
Cirris 4200 Series User Manual
15.3.1 Edit Point Labels
Create labels for points using a text editor.
1. Open the test program in a text editor.
2. Beneath the test program, create a LABELS header.
3. Under the header, type the original point name and the new point name, as shown in the example.
LABELS
J1-001 = Point_01
J1-002 = Point_02
J1-003 = Point_03
J1-004 = Point_04
J1-005 = Point_05
J1-006 = Point_06
J1-007 = Point_07
J1-008 = Point_08
J1-009 = Point_09
J1-010 = Point_10
J1-011 = Point_11
4. Save the le and close the program.
5. Turn on the tester. Load the edited test program. From the Main Menu press View to see the changes to the test
program.