Cirris 4200 - Local Test Program Backup Via USB Drive

40
Cirris 4200 Series User Manual
WARNING! Do not format your drive. Formatting your drive will permanently erase all test programs and test settings. If
this happens, you must contact Cirris to make your tester operational again.
19.2 Local Test Program Backup via USB Drive
To back up test programs:
1. Insert a USB drive into the USB port on your tester.
2. Copy your test programs onto the USB drive.
3. Remove the USB. With the test programs on the USB drive, you can save them onto a PC for safe keeping or for editing
through a text editor.
Other USB drive uses:
● Update Firmware.
● Copy test programs between 4200 Series testers.
● Copy test programs between the tester and a PC.