Cirris 4200 - Page 25

Reports
25
6. Load a test program and press Edit Test. Navigate to Reports and either add a new report or select a report to edit (page
31).
7. Under Change Template option, select the report template you added to the tester. Press OK to and save your changes.
Note: To retrieve the original default template, delete the revised template. When you next turn on the tester, the default
template will be restored.
■ Tokens
Specic information included on the label from the tester such as test results, time, and date is written on the label in the
form of tokens. Tokens must be written in a Zebra font on the label exactly as shown below.
Available tokens include:
● {TestName}
● {Date}
● {Time}
● {ErrorDetails}
● {TestStatus}
● {TesterID}
● {TesterType}
● {LotID}
● {Adapters}
● {DeviceDescription}
● {DeviceID}
● {DeviceSignature}
● {Components}
● {Connections}
● {ErrorSignature}
● {KelvinPairs}
● {Parameters}
● {ParamSignature}
● {SpcSettings}
● {FailedCount}
● {PassedCount}
● {TotalCount}